Why I'd Rather Work With a Supplier Who Admits What They Don't Do
-
My Position: A supplier who admits their boundaries is more reliable than one who claims to do everything
-
Mistake #1: I confused "one-stop shop" with "efficient"
-
Mistake #2: I assumed "doing more" meant "better service"
-
Mistake #3: I thought a specialist "only doing one thing" was a weakness
-
"But isn't one-stop shopping more efficient?"
-
So here's my advice
My Position: A supplier who admits their boundaries is more reliable than one who claims to do everything
In 2022, I made the most expensive mistake of my procurement career—and it had nothing to do with the product. It was about the supplier.
Look, I've been buying medical devices for nine years. I've made plenty of mistakes. But the biggest one? Believing a single vendor could do it all.
It was 2022. We were setting up a new surgical center. The procurement list had 60+ items—orthopedic power tools, surgical instruments, a couple of lab analyzers for our new diagnostics lab, patient monitoring equipment, the works. I put the whole thing on one purchase order with a "full-line" distributor. Simple, I thought. One invoice, one delivery schedule, one sales rep to call when something went wrong.
I was proud of myself. My director was happy. The rep was thrilled.
Then the order arrived.
Mistake #1: I confused "one-stop shop" with "efficient"
Orthopedic power tools and surgical instruments? Fine. No issues. But the hematology analyzer needed calibration against our existing QC system, and the vendor said "that's outside our service scope." The two-year warranty? Effectively gone. The clinical chemistry analyzer had an interface protocol that didn't match our LIS—their tech support said "that's a software vendor issue, not ours."
One order, three vendors pointing fingers at each other while we sat in the middle. I spent three weeks coordinating conference calls, then had to pay a third-party integration firm to make the analyzers talk to our systems. The "convenience" of that single PO cost us roughly $4,800 in extra spend and three weeks of delay. Not to mention the credibility hit with my team.
I knew I should have split the order. Orthopedic and dental equipment to a specialist—Zimmer Biomet Surgical, for instance, whose core business is implants and surgical instruments—and the diagnostics gear to a lab-focused supplier. Thirty minutes of extra coordination. It would have saved us $4,800 and a very uncomfortable CFO conversation.
I thought "what are the odds something goes wrong?" Well, the odds caught up with me. They always do.
Mistake #2: I assumed "doing more" meant "better service"
After that mess, I started paying closer attention to how vendors talk. And I noticed a pattern: the ones who claim to sell everything tend to say "yes" to everything.
Early 2023, we were evaluating a new supplier for a different project. Their deck said "full-category supply capability." Orthopedic implants, surgical instruments, diagnostic equipment, even some lab consumables—they had a slide for every category. I asked one specific question: could their navigation system interface with our third-party lab analyzers for intraoperative data integration?
Answer: "In theory, yes. We can arrange a technical evaluation."
In theory, yes. In practice, they'd never done it. I found that out six months later when their "technical evaluation" concluded that the integration would require custom software development—at our expense. Translation: "We'll figure it out later." But not our expense, apparently.
Around the same time, I had a conversation with Zimmer Biomet's technical support—not about lab analyzers, but about their orthopedic navigation system. Their answer was refreshingly direct: "We don't open that interface. If you need intraoperative data integration, you'd go through our software ecosystem."
That's it. One sentence. No empty promises, no vague commitments. And that answer made me trust their orthopedic expertise more, not less. Here's a vendor that knows exactly what they do and what they don't.
Mistake #3: I thought a specialist "only doing one thing" was a weakness
This is the counterintuitive part—and the one I most want to share.
Once, our cardiology colleagues needed a patient education guide on stent placement. The title they were working with was literally "how is a stent placed"—simple, patient-facing. I casually asked that "full-line" supplier's rep if they had anything useful. They sent over a "general surgical guide." Twenty pages. Somewhere in the middle, one line described stent placement as an "orthopedic-adjacent procedure." Not wrong in the loosest, most meaningless sense. Completely off base in every useful sense.
A vendor that actually specializes in interventional cardiology would've sent a proper procedural guide—or at least said "that's not our product line, you should talk to the XX team."
Here's the thing: a vendor who says "that's not our strength" is more trustworthy. Because you know they're not bluffing about what they are good at. The one who claims to do everything? They're bluffing about something. You just don't know what yet.
Now, in every first meeting with a supplier, I ask: "What do you not do?"
"We do everything" gets noted and deprioritized. "We focus on X, Y and Z aren't our strengths, here's who does it better" gets my attention—and I evaluate their X seriously.
Part of me still wants the simplicity of one vendor for everything. It would make my life easier. Another part knows that simplicity is a story I tell myself while the invoices pile up. I'll take complexity over chaos any day.
"But isn't one-stop shopping more efficient?"
I know someone's going to push back. One vendor, one invoice, one point of contact—it sounds simpler. Fewer meetings, less paperwork, a single relationship to manage.
I get it. I really do. I've been tempted by that logic more than once.
But here's the real math:
- Compatibility risk: Cross-category equipment integration fails more often. Warranty disputes, interface mismatches, calibration failures—these hidden costs don't show up in the procurement phase. They show up six months later when a machine goes down and nobody knows whose fault it is.
- Diffused accountability: When things go wrong, no one owns it. Vendor A blames Vendor B's equipment. Vendor B blames Vendor A's installation. Vendor C "is just the distributor." You end up paying for the whole mess.
- Depth of expertise: An orthopedic implant company won't know lab analyzer calibration standards better than a specialized manufacturer. That's not a capability issue—it's a focus issue. And focus is exactly what you're paying for.
Per FTC advertising guidelines, vendors need substantiation for performance claims (FTC Business Guidance on Advertising). A supplier that claims deep expertise across orthopedic implants, hematology analyzers, clinical chemistry systems, and stent placement guides simultaneously? I've never met one that could actually back it up.
I haven't seen one yet. And I've looked.
So here's my advice
Next time you're evaluating suppliers, don't just ask what they can do. Ask what they don't do.
The ones who honestly tell you "this isn't our strength" tend to be more reliable when you actually need their core products. Because they know what they're good at—and they know what they shouldn't touch.
There's something satisfying about finding a vendor who tells you the truth, even when it costs them a sale. Those are the ones I keep coming back to.
I learned this the hard way, across four years and roughly $6,000 in tuition (counting the rework, the wasted time, and at least one order that ended up in a dumpster). Hopefully you can skip that part.
Ask the uncomfortable question. Listen for the honest answer. Your future self will thank you.